1) Description of Spline Gear Shaft
The splined shaft is a transmission component that disperses loads through multi-tooth meshing
and can withstand combined radial, axial and torsional forces.
2) Characteristics of Spline Gear Shaft
a) Simultaneous contact of multiple teeth ensures more uniform load distribution and avoids single-point stress concentration.
b) Optional rectangular splines, involute splines, etc. are available. Different tooth profiles are suitable for different load requirements
3)Advantages of Spline Gear Shaft
a) High load-bearing capacity: The torque transmission capacity is several times higher than that of single-key connections (such as flat keys).
b) Strong fatigue resistance: Multi-tooth load sharing extends service life, suitable for frequent start-stop or impact loads.
| Products | Spline Gear Shaft |
| Custom Made | √ |
| Gear Profile Type | Cylindrical Gear |
| Gear Teeth manufacturing | Gear Milling/Gear Hobbing/Gear Shaping |
| Gear Teeth Grinding | √ |
| Module (M) | 10 |
| Number of Teeth (Z) | Custom |
| Pressure Angle (α) | 0° |
| Helix Angle (β) | 0° |
| Teeth Accuracy Grade | ISO 6-7 Grade |
| Heat Treatment | Carburizing |
| Surface Hardness | 58-62 HRC |
| STEEL CODE GRADES COMPARISON |
| CHINA/GB | ISO | ГΟСТ | ASTM | JIS | DIN |
| 45 | C45E4 | 45 | 1045 | S45C | CK45 |
| 40Cr | 41Cr4 | 40X | 5140 | SCr440 | 41Cr4 |
| 20CrMo | 18CrMo4 | 20ХМ | 4118 | SCM22 | 25CrMo4 |
| 42CrMo | 42CrMo4 | 38XM | 4140 | SCM440 | 42CrMo4 |
| 20CrMnTi | | 18XГT | | SMK22 | |
| 20Cr2Ni4 | | 20X2H4A | | | |
| 20CrNiMo | 20CrNiMo2 | 20XHM | 8720 | SNCM220 | 21NiCrMo2 |
| 40CrNiMoA | | 40XH2MA/
40XHMA | 4340 | SNCM439 | 40NiCrMo6/
36NiCrMo4 |
| 20CrNi2Mo | 20NiCrMo7 | 20XH2MA | 4320 | SNCM420 | |
|
|
Custom Made Spline Gear Shaft for Extended Service Life in Various Applications Images
|
